Tags: OMNeT++ Network

Due to inflexibility, design and control of existing networks are very complex. Therefore, SDN aims to separate control and data planes clearly, which is an innovative and effective approach to this problem. With SDN, a service provider can adjust the settings of a network according to various requirements dynamically and in a timely fashion. This feature is especially suitable…

Antennas in Body Area Networks (BAN) should be designed according to the link they are expected to form. In most of the systems, an on-body gateway collects data frames from other on-body sensors and relays them to an off-body gateway, realizing two different modes of operation, on-body and off-body. For such a device, the on-body link and the off-body link have different radiation pattern requirements.…

Improving spectral efficiency as well as link reliability has become imperative in nowadays wireless communications. To achieve this purpose, combining Multiple Input Multiple Output (MIMO) architecture with Orthogonal Frequency Division Multiplexing (OFDM) technique is a widely accepted solution and has been implemented in various communication standards. Channel estimation is a critical processing step which is…

This paper presents a fast mixed-signal automatic gain control (AGC) method for zero-IF/sliding-IF receivers used in wireless personal and body-area networks (WPAN/BAN). The preamble defined in Bluetooth low energy (BLE)/802.15.4 /802.15.6 specifications are as low as 1 Byte. It is a tough challenge for the zero-IF/sliding-IF receivers to perform AGC training, frequency synchronization and symbol timing estimation. By detecting the…

Future wireless networks are expected to provide augmented and data-intensive services in a multi-vendor multi-proprietor scenario. This scenario introduces relevant challenges to the networkinginfrastructure, especially in terms of flexibility and interoperability, that could be addressed by extending the concept of Virtualization and Software Defined Networking (SDN) to the wireless or wired-cum-wireless world. This paper provides a review of the perspectives to the…

The OpenFlow (OF) protocol is widely used in Software Defined Networking (SDN) to realize the communication between the controller and forwarding devices. OF allows great flexibility in managing traffic flows. However, OF alone is not enough to build more complex SDN services that require complete control and management of the data plane (e.g. configurations of ports, queues, etc.). The…

The Internet is now present in our personal and professional life, where reliability and green communications are still open issues to be addressed. Usually, clients establish Service Level Agreements (SLAs) with their Internet Service Providers (ISPs), including parameters of reliability and bandwidth. On the other hand, the ISPs aim to maximize their profit by establishing…

In this paper we propose a novel resilience scheme for OpenFlow-based Software-Defined Networking(SDN). To forward packets in line speed, OpenFlow switches store their flow tables in expensive, limited TCAM due to which the stored tables cannot be large. Most resilience mechanisms require additional entries thus the implementation in OpenFlow may quickly exceed the available TCAM. Loop-Free Alternates…

An Adaptive Dynamic Network Coding (ADNC) scheme conceived for Cooperative Cognitive Radio (CCR) is proposed for devising a novel ADNC-CCR system. The system is designed for supporting communications between multiple Primary Users (PUs) and a common Base Station (BS), where the independent source information is transmitted from the PUs to the BS with the aid…

Aiming at a practical industrial network control system, this paper makes an analysis of types of data, their traffic and directions under different working conditions, and a selection of a link of maximum traffic as a typical one. The method of passive measurement is used to obtain the packets of different protocols passing through the…